IBM CATE A4040-109

1、100％の本格的なA4040-109試験問題集は過去の試験問題及び最新模擬試験問題から作られたものです。
2、業界最先端のA4040-109模擬試験ｿﾌﾄは実際の試験雰囲気を模擬したものです。
3、A4040-109試験科目は常時最新化され、最新の試験内容まで織込まれた精確性が有ります。
4、高価な講座を受ける必要はなく、20～30時間の独学だけで、一発合格が可能です！
5、A4040-109 Exhibits、Drag & Drop、Simulationには実際に行われた試験の様式を全て含めております。
6、A4040-109試験科目を一度お買い上げ頂ければ、一年間無料で問題集をアップデートするサービスが付きます。
7、毎日２４時間インタネット上でA4040-109技術サービス（無料）を提供致します。

IT-PassportsのCATE問題集を使って100％合格することが保証できます。

弊社は一発合格することを保証し、もし弊社の問題集A4040-109 「Assessment: Power Systems Virtualization Technical Support for AIX and Linux -v2」を使ってから、試験を通っていなかったら、弊社は全額を返金します。 弊社は一年以内に無料更新版を提供し、一発合格することを保証できます。

一年間に無料で問題集を更新するサービスを提供します。

弊社の商品を買ったことがあるお客様に一年間無料更新のサービスを提供致します、ですので、貴方が持ってる問題集はきっと最新版でございます。

IBM A4040-109 「Assessment: Power Systems Virtualization Technical Support for AIX and Linux -v2」はIBM資格認定の重要な試験集です。該当アイクオリサートロジックA4040-109模擬試験集は非常に理想的な試験に備えるツールと言えます。もし、A4040-109模擬試験を御利用頂くと、以前の過去試験問題とほぼ同じの現行問題をご体験できます。全部の問題集は弊社の専業認証人員が念入りに編纂されたものです。ご受験者は高額教育活動にわざわざ参加する必要がなく、ただ20時間か30時間の気楽な一連の準備、勉強記憶及び模擬テストだけで、受験できます。100％一発合格！失敗一回なら、全額返金！

IBM A4040-109 試験シラバストピック:

IBM Assessment: Power Systems Virtualization Technical Support for AIX and Linux -v2 認定 A4040-109 試験問題：

問題 #1
A dedicated LPAR has two dedicated Fibre Channel HBAs assigned to it.
In order to reduce the amount of hardware, the LPAR will be migrated to a currently
running VIO server.
The administrator collects some server performance from the VIO server and notices that the I/O peaks at 5.5Gbits and runs at an average of 4Gbits per second.
The VIO Server runs two dual port 8Gbit FCS cards, so the load is not affected by other LPARS on the VIO Server.
Which of the following is the most cost-efficient configuration for the VIO client?

A. Dedicate two new Fibre Channel HBAs to the VIO Server and use them to exclusively host the vSCSI disks for the new client partition.
B. Assign one of the ports in the 8Gbit Fibre Channel HBA, using NPIV directly to the new client partition.
C. Install SDDPCM drivers onto the VIO Server, set up the client LPAR and run the following command: "datapath priorities vhostX fscsi0 fscsi1 fscsi2 fscsi3".
D. Assign vSCSI disk for the new client LPAR through prioritized channels.

問題 #2
An administrator plans to implement Active Memory Expansion on several LPARs on a Power 770 system. Which tool should be used to determine the recommended LPAR settings for Active Memory Expansion?

A. amelpar
B. amepat
C. amemon
D. amestat

問題 #3
What configuration change must be made on a Power Systems server to allow a Host Ethernet Adapter (HEA) to be used as part of a Shared Ethernet Adapter (SEA) on a Virtual I/O Server?

A. The HEA port must be set to promiscuous mode.
B. Set the "Allowable VLAN IDs" to the PVID of the VIOS Virtual Ethernet Adapter.
C. Set the HEA Port Group Multi-Core Scaling value to 1.
D. Enable 802.11Q protocol on the HEA port that will be assigned to the SEA.

問題 #4
A customer is planning to migrate an existing AIX 7 environment from POWER5 hardware to POWER7. The existing deployment consists of multiple machines, each hosting many LPARs. Due to software licensing constraints, the new environment must maintain the same number of logical CPUs. The pmcycles command reports the following on an LPAR on the POWER5 environment:
$ pmcycles -m CPU 0 runs at 2198 MHz CPU 1 runs at 2198 MHz CPU 2 runs at 2198 MHz CPU 3 runs at 2198 MHz CPU 4 runs at 2198 MHz CPU 5 runs at 2198 MHz CPU 6 runs at 2198 MHz CPU 7 runs at 2198 MHz
How many virtual CPUs should be assigned to the destination LPAR on the POWER7 environment?

A. 8
B. 2
C. 1
D. 4

問題 #5
An administrator is configuring a new virtual Fibre Channel connection that will use NPIV to connect a client LPAR to a SAN.
The administrator has created a client adapter in virtual slot 8 and a server adapter in virtual slot 600. The appropriate virtual adapter definitions have been successfully added into the client and VIO server profiles and a DLPAR operation to add the virtual adapters into both partitions.
The administrator runs cfgmgr on the client partition but receives an error. The administrator then checks the definition of the client adapter in AIX Based on this information, what is the most likely cause of the error?

A. The virtual server adapter has not been mapped to a physical Fibre Channel adapter.
B. The virtual Fibre Channel server adapters are not supported with virtual slot numbers higher than 512.
C. The virtual Fibre Channel device driver has not been installed on the client.
D. The virtual server adapter has been incorrectly mapped to virtual slot 3 for the client.

解説：